-
flashprog v1.3
I try to fix **HP 8300 USDT** with BIOS that was self destructed in a mysterious way. I use external SPI programmer with a clip for SOIC16. I can flash BIOS from HP (v2.90, file K01_…
-
Hi @xiv3r,
I am having an issue with KeeneticOS on my Xiaomi Router 4C. After installing KeeneticOS, I would like to revert back to the original Xiaomi firmware, but I have been unable to do so des…
-
```
$ ./flashprog -p ch341a_spi -E --progress -f
flashprog p1.2-2-gc6a924a on Linux 6.1.0-25-amd64 (x86_64)
flashprog is free software, get the source code at https://flashprog.org
Using clock_g…
ds2k5 updated
1 month ago
-
### Component
Dasharo Tools Suite
### Device
NovaCustom V56 14th Gen
### Dasharo version
_No response_
### Dasharo Tools Suite version
1.2.23
### Test case ID
_No response_
…
-
There is a lot of information out there on ch341a programmer giving too much voltage (5v vs 3.3v). Users reports of having bricked their laptops (SPI chip to motherboards resistors).
One of those e…
-
currently it only support device 1a86:5512 but I have 5523
```
$ lsusb
Bus 002 Device 009: ID 1a86:5523 QinHeng Electronics CH341 in serial mode, usb to serial port converter
```
try changing…
-
I am trying to read the flash chip using a ch341a programmer and I get the following response:
I ran the command sudo flashrom -p ch341a_spi -r flash.bin
Found ST Flash chip "Unknown ST SPI chi…
-
"To make a flash dump I must use a specific utility for this type of flash chips called "Flashrom". I already had a CH341A mini-programmer, but only with a SOIC8 clip, so I bought a SOIC16 one, I use …
-
Huananzhi rev1.26 bios
1. Original bios from Huananzhi x99 v1.26 (dump with CH341a)
2. Modified bios, menu "Memory Timings & Voltage Override", "SOCKET RAPL Config", "Per-Socket Configuration", "…
-
Please, remove all Virus detected by Microsoft Windows Security