-
I have built it from sources for M0S Dock and the device is not stable. Sometime it freezes during communication but typically it cannot be detached from device and hangs when closing the connection.
…
-
**Describe the bug**
When Jlink is configured to be in CMSIS-DAP mode, probe-rs could not use it in both Jlink and CMSIS-DAP mode.
**To Reproduce**
1. Set a Jlink probe to be in CMSIS-DAP v2 mode…
-
### Development Kit
Custom
### Module or chip used
ESP32-WROVER-E
### Debug Adapter
nanoDAP-HS
### OpenOCD version
v0.12.0-esp32-20240318
### Operating System
ArchLinux
### Using an IDE ?
v…
-
At least on windows (I did not test other OSs yet), the rusty-probe enumerates as two devices with the same serial number.
For this reason, `probe-rs` requires additional parameters `--probe 1209:485…
-
**Is your feature request/improvement related to a problem? Please describe.**
Some people don't have a ST-Link or a regular USB-to-UART adapter, but have a e.g. Raspberry Pi Pico, which can be [ea…
-
Hi,
Thanks for this great project! I just found there's only cmsis dap link v1 support, the v2 support is missing. I'm wondering is there any patch or on going work with the daplink v2 support?
…
-
macOS Sonoma 14.6.1 (M1)
Command Line Tools 15.3
Homebrew
This repo sdk-2.0.0
libjaylink 0.3.1
gcc 14.1.0 (aarch64)
jlink-edu v9.3
pico 2
`./configure --prefix=$HOME/local --enable-jlink --e…
-
Hi,
I am observing the following error with CMSIS-DAP v2 (WinUSB) devices either running DAPLink ver. 0254 or Cypress KitProg3:
> C:\Users\anjo>pyocd list
> Exception ignored in:
> Traceback …
-
Hiya,
am getting an issue where i can't seem to get opencd to work on a gd32e505re.
This is the error message:
```
Building in release mode
Checking size .pio\build\genericGD32E505RE\firmware.…
-
Hi,
Set up a spare Raspberry PI Pico as a Picoprobe (as described in https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf Chapter A) and tried to upload a sketch using a programmer…