-
Hello,
we already had contact in the victron forum.
I would like to use the driver to integrate three charge controllers.
In addition, there seem to be problems when dbus-serialbattery runs in pa…
-
Hi, is it possible to be able to change the parth to USB device? I have two same UART devices and I am not able to change the path.
the Issue is that there is possibility to add different path, but…
-
Hi,
I could successfully connect to my BMS using serial and It is obviously `sinowealth` as it's only working with this option.
I'm trying to do same over bluetooth following the [given example]…
-
Hi, I connected the UART connector from BMS directly to my Raspi GPIO ports , and can read the data via /dev/ttyS0 .
But no luck to use your script to send the data via mqtt to my mqtt iobroker on my…
-
Hello,
I am new to Github, so forgive me this stupid question: Where do I find an executeable file to start "Dalylog"?
Since I cloned your url to my Raspi, all the files appear, but no executable fi…
-
### The problem
hi,
unfortunately the DALY_BMS component does not read my first 4 cells.
Installed are 16 cells, the values of the other cells come.
Can I write or read any logs with here?
…
-
I´d like to have an IoBroker Adpater for my Daly LiFePO4 smart BMS to read out all the values of my 3 battery´s.
![image](https://user-images.githubusercontent.com/102368536/160134718-0c047c44-ef80-4…
-
Hey,
because i want to use the Daly BMS via CAN i ordered a Makerbase CANable USB Stick and implemented your library with CAN.
I put the files here: https://gist.github.com/derlucas/d548562492db96…
-
Hi,
Thanks for your code, it's very helpful. Where did you find the doc to interact with the BMS through Bluetooth ? I was able to find that my Daly is using [this module](https://fccid.io/2AD56HLK…
-
Hello,
I have Daly BMS 16S 48V 200A connected to Pi device. I have also Growatt Inverter connected to the same pi device. I am able to read info from both devices and my problem is that i can not fin…