-
**Describe the bug**
Using DCS-BIOS to control the armaments panel doesn't work as expected.
Using arm-master (device ID 2 - electrical system) works as expected, but any control with device ID 6 (…
-
Hello
I'm new here and trying to figure out how to code in DCS BIOS using the STM32 extension for an f-16 cockpit, I'm currently using the dcs-bios-arduino-library-0.3.9.
After I compile the code …
-
I tried to start up the program but the initial screen is not detecting my DCS Bios which is in D:\Program Files\DCS-BIOS\dcs-bios-hub.exe
Is this because my DCS Bios is not where expected, the C:/ D…
-
[Data_Captured.txt](https://github.com/dcs-bios/dcs-bios/files/1821774/Data_Captured.txt)
[Data_Captured.txt](https://github.com/dcs-bios/dcs-bios/files/1821775/Data_Captured.txt)
Hi,
I have tr…
47box updated
2 years ago
-
Hi, i have a problem with servo´s and the dcs-bios, (Everything else works perfectlywhen i did a test with Arduino´s own servo example it works well.very well, when i try Flap meter example, it do not…
OH1CL updated
6 years ago
-
Hey again , i have test my system and get some issue with a10c trim pot , i use cheapest pot so that not keep accurate position, example pot value is 3200 but that pot give value range 3190-3210 so dc…
-
Hi,
I'm trying to use dcs-bios for the F18, but when I use a toggle switch, nothing appends in DCS.
In the console, their are several messages, even the message for the toggle switch, but nothing …
-
DCS-BIOS version
0.8.0 [2.9.3]
DCS-BIOS Control
DcsBios::PotentiometerEWMA radarAngle("RADAR_ANGLE", A3);
DcsBios::Switch2Pos radarAoacomp("RADAR_AOACOMP", 10);
DcsBios::AnalogMultiPos rada…
-
I do apologise if this has been mentioned previously.
Last night I tried to install DCS-Bios. After installing the plugins went to the 'DCS Connection' screen but could not see my DCS installation.…
-
**DCS-BIOS version**
2.8.7
**DCS-BIOS Control**
All (tests on DcsBios::Switch2Pos radaltTestSw("RADALT_TEST_SW", A0);)
**Describe the bug**
I am using the Adafruit Qualia ESP32S3 board, drivi…