-
Love the script :)
But I had to change minor parts to be able to use it in the new version of the Dutch Smart Meter Requirements (dsmr 4.0).
- the OBIS data
some output numbers are changed, but the…
-
Hi all,
After charging for some while I started checking the system in Smart mode.
I have the SmarEVSE-2 and sensorbox 2 connected with 20m Cat6 cable, the sensorbox uses the P1 port to receive da…
-
Hi Matthijs,
I have seen reports that belgium smartmeters do not parse correctly using the 5.0.2 dsmr parsing. This is due to the extention made by the Belgium netbeheerder.
The document for Belg…
-
### Support guidelines
- [X] I've read the [support guidelines](https://github.com/xirixiz/dsmr-reader-docker/blob/main/.github/SUPPORT.md)
### I've found an issue and checked that ...
- [X] …
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…
-
Hi @mrWheel,
I tried compiling your code Arduino with 1.8 but did not succeed. Would flashing a precompiled bin file by you work?
I have an analog meter and a charging point that needs a P1 teleg…
-
Was looking for something like this. I have a (very old) raspberry pi near my smartmeter which I currently use to get the data to emoncms.
Now I'm moving several things over to Home Assistant and thi…
-
Hi Thomas,
Not an issue but a feature request.
Is it possible to adapt you're solution to use it with the [Xemex CSP1](https://xemex.eu/nl/producten/meters-sensoren/csp1/) ?
Send fake p1 data to …
-
### The problem
I received and got installed a brand new meter, the Landis+Gyr E360 (DMSR 5)
Had to try DSMR, right? I know my meter is not supported (yet).
* power consumed and produced are okay…
-
### Description
Gisterochtend is mijn 1-fase meter vervangen door een een 3-fase (en DSMR4 => SMR 5.0). Na het opnieuw inpluggen zag ik netjes alle data (inclusief L2/L3) en leek alles te werken.
…