-
Is there any existing examples or support for use of the ECC608 with Sierra Wireless HL78XX modules, specifically the HL7800. There is a built in TLS stack but it requires feeding the private key in p…
-
This is a placeholder to discuss work that will need to be done mostly in various upstream repos.
Relevant repos:
- https://github.com/helium/ecc608-linux-rs
- https://github.com/helium/helium-cr…
-
Hi,
I've been using your library on an Arduino Uno and everythings works great (thank you!). However, when I try to compile for the Arduino Uno WiFi rev2, I get a long list of errors from the RNG.cpp…
-
When no ECC can be found on the I2C bus we get the following output:
```
root@dd264db:/opt# i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -…
-
Hello Team,
I am working on a project using Teensy4.0 Development board. I have been able to successfully connect to AWS IoT. But I want to implement the JITR using the Microchip ATECC608 Trust and…
-
Great work!
Issue found: Sending a message larger than 16384Bytes ("TLS maximum message content length setting" in menuconfig) makes system crash.
Same problem when sending DirectMethods with a …
-
I would like to know if the ECC608 and SIMCOM7600 can be used together. I intend to use a certificate from the ECC608 and have the SIMCOM7600 communicate with AWS IoT Core via MQTT(S), with the board …
-
Hi there,
I am currently using AETCC608A with raspberry pi cm3 on my customized PCB. The chip is connected to I2C-0 and I can talk to it successfully, like read-config, write-config and check if da…
-
It turns out that Syncrobit miners have several possible locations for the ECC key on the i2c bus...
https://github.com/NebraLtd/helium-syncrobit/issues/2
We should add handling for this scenari…
-
Hello, first of all thankyou for this detailed example on configuring and provisioning the ECC chip with esp32.
I was successful in configuring the chip and retrieving the public key in my example. B…