-
I'm using the following product: https://shop.pimoroni.com/products/inky-impression-4?variant=39599238807635
And running inky v1.5.0 on python 3.11.2 on a raspberry pi 4
I get the following erro…
-
I read [that](https://github.com/grandideastudio/jtagulator/issues/46) but it does not help me.
I tried to update jtagulator (32115) from 1.6 to 1.12 in Windows
I tried Propeller 1.3.2
When…
-
V1.2.0 pre
Uploading a new firmware clears the eeprom
When uploading a new firmware. This clears anything that was stored in the the eeprom (saved rhythms, sensitivity settings etc... )
In th…
-
### Describe the bug
System is stuck in infinite loop when bootloader attempts to upgrade the firmware, but the EEPROM is write protected.
I would expect the bootloader to not attempt a firmware u…
-
We must implement the EEPROM library to keep it compatible with standard AVR Arduino.
Where the EEPROM library implementation does not even have actual EEPROM, it should work with various non-volatil…
-
-
The PCF8563_RTC will not compile in the arduino IDE,
Around line 270 in the pcf8563.cpp the following code exists.
void PCF8563Class::initialize (void)
{
INTERNAL_EEPROM_PORT.begin();
…
-
**Is your enhancement proposal related to a problem? Please describe.**
When used in production environment all devices must have different "real" mac addresses.
Using a random (or derived from devi…
-
I am getting the following in the terminal when attempting to flash a P8X32A-D40.
```
proploader.mac -k -D baud-rate=115200 -p /dev/cu.usbserial-P97z9aa5 "~/pixelmusic3000e.binary" -e
Opening fil…
k6lcm updated
2 months ago
-
Add support for EEPROM saving/loading
agg23 updated
2 months ago