-
It is recomended to mount it to /boot or /efi.
Alternatively, use --esp-path= to specify path to mount poi…
-
Thank you for developing the krun project! We are preparing to migrate from vfkit to krun. However, we are currently facing some issues.
When using vfkit, we started the virtual machine through kerne…
-
I'm getting a black screen on my ThinkPad T430 while I'm trying to boot Catalina from the EFI generated by Opcore.
CPU: i7-3610qm
Will provide EFI partition if necessary.
-
fwupd-efi 1.7 displays the following error messages and simply hangs:
1. failed to find (HD1,GPT,)/EFI/systemd/fw/
2. could not locate device handle
I verified the is correct and the capsule fil…
-
**Description**:
After creating a whole disk pool from Linux (with ZFS 2.1), then creating a volume from Windows, I got `zfs set mountpoint=...` to hang in the console. When creating the volume, I se…
-
In `amazon-image.nix`, ESP Partition mount to `/boot` via a file system label `ESP`.
```
fileSystems."/boot" = mkIf (cfg.efi || cfg.zfs.enable) {
# The ZFS image uses a partition labeled ESP whet…
-
Increase the EFI partition size from 500 MiB to 1 GiB. This is consistent with a recent change to `archinstall`. It was increased to allow larger firmware updates to work.
https://9to5linux.com/arc…
-
I wanted to install a systemd-boot based system.
The installer doesn't have currently an option for that, that is okay.
systemd-boot cannot load initramfs from different partitions, so the old lay…
-
**Dasharo version (if applicable)**
Dasharo (coreboot+UEFI) v0.9.0-rc2 for Odroid-H4
During training, we tried numerous things with @filipleple and @philipandag:
For example, we put the platf…
-
Hello,
I'm attempting to flash UBoot onto my Nexus 7 (2012 / Grouper). Ultimately, my goal is to flash PostMarketOS onto it. One of the requirements for that is to flash uboot onto it.
This is …