-
What are the specifications for this board? specially compared to http://electrodacus.com/SBMS100/manual/SBMSmanual.pdf
-
I use your WiFI app extensively to monitor my power station which is two floors down in the garage and it's a great help. Most of the time I can just leave the Legacy page on the monitor screen which…
-
Could this BMS be used in an application like the Tesla Powerwall?
-
This is not a priority but if you have time you can allow for another type of raw data to be pass trough when someone wants to download the monthly internal data log from the SBMS.
The format of that…
-
## Blogs
- https://github.com/Staok/thoughs-about-hardware-design
- https://www.emoe.xyz/all-about-electronics/
- https://www.analog.com/cn/resources/reference-designs.html
- https://www.envox.eu/…
-
I was able to compile the code (as-is) and upload it to my esp32, however, the unit fails to boot properly.
To be sure it was not my hardware, I programmed another esp32 I had on-hand and got the sam…
-
Hi Gemu,
thanks a lot for the beautiful scripting feature.
I am using a Gosund SP1, GPIO4: 134, GPIO5: 132, GPIO12: 131, GPIO14: 21.
I am monitoring power and switch off the relay as soon as po…
-
- [ ] SOC
- [ ] Battery voltage
- [ ] Charge/discharge current
- [ ] Temprature
- [ ] Min/max cell voltages
- [ ] protection notifications
-
From this discussion, two reports of somewhat the same issue (sorry, tons of off-topic postings in the middle of the two reports). https://groups.google.com/g/electrodacus/c/m0JlWcBBAOk
**Here is th…
-
New user, thanks for the work put into this
I played around a bit with the code and implemented static IP addresses for my use. Thought I'd implement that in the UI as well as a setting on the conf…