-
Seems to be a recurring issue with this driver. I'm sorry if this has been covered before. I'm an amateur when it comes to embedded and it's my first time doing it.
I have a Pi Pico with a Pimoroni…
-
This tracking issue covers the integration of the crate with various `embedded-hal` traits.
Current state of `embedded_hal` in relation to what this crate needs:
- PWM: [`embedded_hal::pwm::SetDut…
-
https://github.com/rust-embedded-community/embedded-sdmmc-rs/blob/710bd34253d453de4045c7307d1d286ccc1972ed/src/sdcard/mod.rs#L61-L67
If you take a CS pin directly, you have to use SpiBus, not SpiDe…
-
I created this based on the STM32 example:
```
use anyhow::Result;
use esp_idf_hal::delay::FreeRtos;
use esp_idf_hal::peripherals::Peripherals;
use esp_idf_hal::spi::{config::Config, SpiDeviceD…
-
Hi,
Lot of sensors can be used with both I2C and SPI, so why not defining a generic I/O trait that is bus independent like the std::io trait that is not available in a no_std program. In my drivers i…
-
Hi, I'm trying to follow the example to use the driver, but the initialization depends on the `embassy_time`'s definition of a Delay trait. It would be nice to see how to do it with the lower-level `e…
-
Whenever I start the builtin round camera for quick videorecordings I receive below crash.
It works perfectly fine with official Telegram FOSS client but Forkclient crashes it.
I tried reinstalli…
-
The current RMT wrapper targets the ESP-IDF library v4 interface, which does not support a TX and RX RMT driver on the same pin.
However, the v5 library does support TX and RX mode on the same pin…
-
Using a Debian environment with cargo & rustc versions 1.78.0.
Problem: Cargo cannot install crate `embassy-net` from crates.io with feature `raw`
Steps to reproduce problem:
1. Create new proj…
-
I tried the crate like this with my ESP32-C3-Zero:
```
use anyhow::Result;
use esp_idf_hal::delay::FreeRtos;
use esp_idf_hal::peripherals::Peripherals;
use esp_idf_svc::log::EspLogger;
use esp…