-
Dear @CFSworks - thanks for getting the EMC2301 into the firmeware with #125 :).
I just added a EMC2301 to my TPi 2.4 and booted the board up, sadly there was no hwmon1 entry.
Looking at i2cdetect -…
-
Upon running `sudo ./install.sh`
this is the output :
```
> Copying source to /usr/src/cm4io-fan-0.2.0...Done
> Running DKMS install...
> Error! The /var/lib/dkms/cm4io-fan/0.2.0/6.1.21-v8+…
-
Hi,
i couldnt figure out yet how to get it working on ubuntu 20.04
the latest kernel there is 5.4.0-1042-raspi
the module compiles fine but it requires changing the regex in dkms.conf
the bi…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
为避免重复issue，请先搜索issue，确认没有类似issue再提交新issue；
注意搜索时**包括已关闭**的issue（删掉搜索框的的“is:open”条件）；
Q：是否用关键词搜索了issue? (使用 "x" 选择)
* [ ] 没有类似的issue
## 2. 详细叙述
### (1) 具…
-
### Describe the bug
Having successfully enabled the Compute Module 4 IO Board embedded fan controller and RTC from config.txt using the following lines:
```
dtparam=i2c_arm=on
dtoverlay=i2c-rtc…
-
Hi,
Could you give me a little example on how to use this.
Your Lib is the only one I could find.
Many Thanks
-
Hi, after connect CM4-fan-3007 to FAN pins (all 4) I can't force it to spin using I2C and cm4io-fan.
Before instaling cm4io-fan when I run `i2cdetect -y 10` I get correct value on 2f and I can change…
-
Looks amazing!
-
If we want to add any module to kernel we need latest headers and source.
For example for dkms and cm4io-fan ... I can't build module
Any advices are welcome
-
Hi, may be you can help:
I've installed your cm4io-fan - basically it works, but somehow the fan speed seems to be wrong.
In my /boot/config.txt I have the following line:
dtoverlay=cm4io-fan,min…