-
I have RTL setup to run on my modified Ender3v2 and is working great.
However I am seeing a slight variance in the first layer quality when doing a sparse infill across the bed as the Z obviously a…
-
https://heerozh.com/post/ender-3-v2-gai-zao-sheng-ji-jing-yan/
作为高性价比DIY机，不改造似乎有点对比起它，不过确实Ender3V2有很多天生缺陷，早晚都得改造。
Ender 3已经是网上资料最多的打印机了，过程中还是遇到了很多没有资料的情况。
挤出
首先遇到的是挤出打滑，这个是单齿轮挤出机的问题，...
-
klippy.log show this
[ERROR] 2023-06-03 18:04:39,214 [root] [virtual_sdcard:_load_file:251] File opened:ender3v2/PowerShroudModUpdatedV2_2h25m_0.20mm_200C_PLA_ENDER3S1.gcode Size:800886 start_print…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Went do download display set, and got a security alert>:(
### Bug Timeline
Started Today
### …
-
I would love to have some help to make it work. try to upgrade the firmware but i'm stuck with a black screen and a buzzer. here my files thanks.
[Config_ender3v2.zip](https://github.com/CrealityOffi…
-
### Description
In the marlin configurations repository under ~~Ender3~~ and Ender3v2, the configuration_adv.h has the E0_AUTO_FAN_PIN incorrectly set to -1 (disabled) where it should be PC7.
I …
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
The fan for the motherboard CR 4.2.7 will only turn on when the part cooling fan turns on.
##…
-
### Cura Version
5.5.0
### Operating System
Linux.Applmage
### Printer
ender3v2
### Name abnormal settings
no
### Describe model location
no
### Describe your model
yes water tight and have…
-
I've followed all instructions on the Readme and the screen doesn't even pretend to flash. I've tried all three files. It just boots up normally with the stock firmware. This morning I found a reddit…
-
https://github.com/Lash-L/Ender-3-V2-Neo-Setup/wiki/Updating-Firmware someone made a tutorial here