-
`C:\Users\Krenil\Downloads\bootloader.bin
test offset : 65536 0x10000
case ok
test offset : 65536 0x10000
case ok
test offset : 65536 0x10000
case ok
test offset : 65536 0x10000
case ok
t…
-
Hello there, could someone please help me to connect and give me a code example?
i have my esp-wroom-32 and my 8pin cc1101 (EO7-M11010) and i want it to receive 433.92 mhz signals
i tried every sing…
-
## Problem Description
I have an ESP32 WROOM 32 Dev1 Kit
When I load the ESP32DevelopmentBoard.ino example file (making the necessary SSID and PW changes) I get the built in LED flashing several t…
-
After loading the sketch on the ESP 32 WROOM, the board goes into a loop and reloads after each attempt to start listening.
## Log:
```
20:37:13.963 -> rst:0x8 (TG1WDT_SYS_RESET),boot:0x13 (SPI_F…
-
### Board
ESP32-S3-WROOM-1
### Hardware Description
0.91" OLED 128x32 display
### IDE Name
vscode
### Operating System
Linux
### Description
Garbled pixels when running the …
-
Hey,
I was looking at the specs of ESP-32, it has features that satisfy quite a bit of the requirements for solo1 hardware.
I was thinking if the firmware would work on it, any suggestions?
-
Ideas for programming quests for ESP
* Set up env
* Using the existing code to blink the LED associated with WROOM 32
* Use existing code to send a new XXX command via BLE
-
Como puedo hacer correr sinric en el esp wroom 32, he probado cientos de librerias modificado alguna, siempre consigo errores websocet, hay algo que funcione?
How can I run synric in the "esp wroo…
-
Hello, trying to understand MAX485 connection to ESP32 from your schema and sketch, please help me to understand.
I have ESP WROOM 32 pinnout
![image](https://user-images.githubusercontent.com/432…
salvq updated
5 years ago
-
Hi, this is such a great job!!
I am trying to upgrade it to the ST7571 controller and for ESP32 based boards.
Could you please give me some help?
I am willing to put a lot of my own efforts i…