-
Would love to have bruce working on my 7 inch cyd
esp32-8048s070 ive found it has a different screen controller then the others any support would be greatly appreciated !!!
-
After much frustration I have finally worked out the problem and solution.
The GT911 really needs the INT pin connected, this is used to set the I2C address of the chip on bootup, then can be used …
-
**Describe the problem you have/What new integration you would like**
Support for Display Driver: [EK9716BD3](https://www.phoenixdisplay.com/wp-content/uploads/2015/07/EK9716BD_DS_rev1.0_201311…
lboue updated
2 months ago
-
I find the download_instructions button to be incredibly useful, so here is a list of all boards without the link enabled.
List requested by limor so we can backfill boards that already have good …
-
## Environment ( 実行環境 )
- MCU or Board name: ESP32-S3
- Panel Driver IC: LGFX_Sunton_ESP32-8048S070.h
- Bus type: LGFX_Sunton_ESP32-8048S070.h
- LovyanGFX version: 1.1.16
- FrameW…
-
I try to get Xila running on my Sunton ESP32-8048S043C board. I believe it has the same hardware for display, touch and sd card. The screen resolution is 800x480, identical to the ESP32-8048S070 which…
-
Hi,
I want to port your guition-esp32-s3-4848s040-display_basic project for a waveshare esp32-s3-lcd-7
Trying to rebuild your guition-esp32-s3-4848s040-display_basic.yaml from the command line g…
-
**Is your feature request related to a problem? Please describe.**
Im using OpenHasp in an environment where wifi is not stable. A better solution would be to use the serial port.
**Describe the s…
-
Right now esp32 board updated on v 3.0.3 so its showing lot's of error if i running on the example function and this is my code
/********************************************************************…
-
SPI
Two separate SPI busses are being used for the display and the touchscreen.
spi:
- id: lcd
clk_pin: GPIO14
mosi_pin: GPIO13
miso_pin: GPIO12
- id: touch
clk_pin: GPIO…
1achy updated
6 months ago