-
As a user, I would like to be able to sweep frequencies using an Ettus B200 USRP at a performance level similar to what can be done with RTL HW using the rtl_power_fftw. Sweeps with the B200 USRP usi…
-
Hello,
I have been playing with `suscan` and remote viewing with SigDigger and found that when running `suscan makeprof` only one profile is created for my USRP (an X310 with two UBX160 daughter bo…
-
Good Morning, thank you for the excellent article and associated repo for capturing droneID radio traffic.
I was also under the impression that DroneID was encrypted. There was a POC last year in Ot…
-
I am very grateful for your work! Do you plan to support USRP B210?
UR21F updated
4 months ago
-
I used this config file:
https://github.com/gnss-sdr/gnss-sdr/blob/master/conf/gnss-sdr_GPS_L1_USRP_X300_realtime.conf
I'm getting navigation data but no location, also some lock loss. I noticed…
-
## Issue Description ##
I am using an X310 with WBX-120 and TwinRX daughterboards. The transmission seems to have a lot of carrier leakage (when sending a stream of 0's, there is still a …
-
## Issue Description ##
After completing the installation of UHD on Ubuntu 22.04 LTS, I was able to successfully run uhd_find_devices. However, when I attempt to use uhd_usrp_probe, I encounter the f…
-
## Issue Description ##
![image](https://user-images.githubusercontent.com/3147884/144061944-eae12de7-122f-4ed6-bfbc-cfd52743d19c.png)
![image](https://user-images.githubusercontent.com/…
-
Primary DSP of the received phase information will be performed on the Raspberry Pi using Gnu Radio code blocks (including some custom blocks for our specific application).
Ettus Research has publ…
-
While building the code with Radio type as X310 we observed error as Invalid Radio type . Due to this i modified if Condition to support X310 Ettus Hardware in Build.sh . After this modification i was…