-
I don't know if you are still interested in this, but my Ramses_RF script advised that I reported the following message
```
11:03:56.594 || 22:006128 | | I | device_battery | ||…
-
By coincidence I noticed my Itho Daalderop CVE RFT uses the RAMSES-II protocol for communication with the RF remotes.
The remote has 4 keys and the 4th key activates a timer. The timer depends on t…
-
Honeywell / Resideo introduced the HCC100 underfloor heating controller. I installed it as part of my Evohome setup, replacing my HCE80. Would it be possible to add support for the HCC100 in **ramses_…
-
First of all complements for your accomplishments so far.
Based on this documentation I am creating a Nodejs module implementing the protocol. Along the way I found some errors and missing parts in…
-
I have an evoHome setup with multiple zones and a heat pump with the ability to cool.
Im not able to cool within the home assistant. I can only choose heat or off.
Am i missing something? If i c…
-
Hi, i think i have a new feature request. I have an evohome setup with a heatpump that supports heating and cooling. Basically my heatpump is controlled by 2 BRD91T1004. One for the normal demand, and…
-
Hi guys, I desperately need your help and some guidance. I have an EvoHome system comprising 12 individual zones each one with its own DT92 thermostat. I have an HGI80 connected to Home Assistant and …
-
In the Evohome control panel, you can see the heat demand per zones. Is it possible to get this data by the API and view this information in the Domoticz web interface?
-
The real RF15 display (Orcon RF15 display) has readout for error codes.
Can you implement these? I have the modbus addressed and error messages for the error codes if this helps.
![foutcode](ht…
-
Hello,
I'm running the latest version of the script: "v3.11-0.22.40".
I issued a "mosquitto_pub -t 'evohome/_zone_independent/command' -m '{"sys_config":"SAVE_SCHEMA"}' -q 1" to generate the sch…