-
### Is there an existing issue for this feature request?
- [X] I have searched the existing issues
### Is your feature request related to a problem?
Have feature specific fan control speeds been ad…
-
A feature that I thought of is to use one or both of the expansions ports to be able to put a fan input from the motherboard. This will send data back to the motherboard emulating a fan and get data f…
-
BIOS: ZMB v1,0
Zimaboard 832
Build Date: 02/23/2022 22:08:56
Per Discord: https://discord.com/channels/884667213326463016/884667213326463019/993564686295519272
The ZimaBoard PWM fan only works…
-
Hey, I'm unsure if it's just my system or writing the fan speed is not supported?
I use a **Waterforce X240** and gigabyte_waterforce is loaded. However the files in hwmon are read-only
```
drwxr…
-
The fan script did not work properly after installation, so I had a look at the service:
```
pi@raspberrypi:~ $ sudo systemctl status x-c1-fan.service
● x-c1-fan.service - Daemon to monitor and co…
-
I've been trying to use Fan Control and I've not been able to take control of the fans connected to the PWM fan headers on the motherboard which is not surprising since the Gigabyte X870E motherboards…
-
Cooling has a massive impact on the quality of an ironing layer on some filaments. I've found with Jayo black matte filament turning of cooling completely during ironing gives great results, while hav…
-
Hello Piotr,
thank you very much for a great app. It works perfectly on my Lennox li024ci ACs with just a couple glitches.
1) For some reasons fanSpeed1 is always reported as 8 which is breakin…
avbdr updated
6 months ago
-
**Device manufacturer**
GPD
**Device model**
GPD Win Mini 2024
**Handheld Companion Version**
0.21.6.1
**Describe the bug**
Fan stops running upon switching from the external power to bat…
-
### Printer model
MK4
### Describe the enhancement
If my gcode uses layer-time dependent cooling or dynamic cooling, the gcode constant overrides my manual print fan speed changes. If there was the…