-
Integrate robot [Fischertechnik TXT 4.0](https://www.fischertechnik.de/en/products/schools/stem-robotics/559888-robotics-txt-4-0-base-set) in the OpenRoberta Lab.
TXT 4.0 is a differential drive robo…
-
Calling a function in a second RoboPro process blocks the execution of the first.
Which one has been blocked, depends on the first who is executed. However both init's are executed well. This only wh…
-
I try to build the firmware inside a docker container (not to mess up my system). But for some reason it does not work. Any idea how to run the build inside docker?
I tried it in `master` branch:
…
-
Using the newly released [v 1.0.5](https://github.com/ftCommunity/ftcommunity-TXT/releases/tag/v1.0.5), my TXT does not update date & time at startup.
According to `/var/log/messages`, `ntpd` is su…
-
There is a discrepancy between the UID/GID in the rom and the one shipped with FTC. To me, it is unclear which one is considered wrong:
/etc/passwd is
in ROM: `ROBOPro:x:1004:1008::/opt/knobloch:/bi…
-
Currently g_ether is not working properly under windows. We should try to be conform to this: https://github.com/fischertechnik/FT-TXT/blob/master/board/FT/TXT/rootfs/etc/init.d/S98usb_g_ether
-
Before switching to Qt5 there was the ability to have a VNC server: https://github.com/ftCommunity/ftcommunity-TXT/blob/fa8d3293061940345948e2bd9f1ebca8bfd93335/board/fischertechnik/TXT/rootfs/etc/ini…
-
cfw 0.9 had that mechanism inside qt4, for qt5 the x server has to do that
-
Regarding the todo in the roadmap
IMO we're currently quite happy with the different solution.
You shouldn't put too much effort into this proposal.
-
Is it possible to use I2C sensors and actuators, like in RoboPro? I couldn't find anything in the documentation or the source files.
I didn't find anything about I2C in Fischertechnik's `TXT-C-Prog…