-
Doc: https://github.com/nathanmarlor/foxess_modbus
https://github.com/nathanmarlor/foxess_modbus/wiki/Modbus-Wiring-Guide
https://github.com/nathanmarlor/foxess_modbus/files/11552447/KH.Series.Modb…
-
As of this afternoon, the FoxESS data is no longer available to me in HA.
The logbook states:
2024-08-02 14:48 - FoxESS Running State: is expired
2024-08-02 14:48 - FoxESS Inverter: is expired
20…
-
In Inverter Settings "communications" ensure Ethernet is set to "DHCP". This reveals 3 settings which must match your Modbus logging device set up as follows;
IP (LAN) Address: 10.10.100.254
Subnet …
-
**What kind of device or service would you like to see an adapter for?**
Fox-ess Inverter
**Is the device connected to the internet or only available on a local network?**
It is connected to the …
-
Hello everyone and thank you for the integration.
For some time now, Foxess sensors do occasionally show the status 'unknown'. After some time (up to 1 hour) everything works fine again. During thi…
-
## Version of the custom_component
## Configuration
```yaml
Add your logs here.
```
## Describe the bug
When looking at the integration in HA it is showing Not Loaded. I've attached a screensh…
-
Hi,
I noticed that the battery charge/discharge data is only available as an int data in full KHW values from the latest Rolar Rel 8.40.1 (23.07.2024). For exmaple, before the charge/discharge was…
-
PoS for fox-ess
https://github.com/StealthChesnut/HA-FoxESS-Modbus
https://github.com/rsaemann/HA-FoxESS-H3-Modbus
https://community.home-assistant.io/t/foxess-inverter-modbus/459313
https://pl…
-
First thanks to Nathan and Dan for updating the foxess_em integration to use the public API
Configured it this morning and I am seeing the following error in the log when I used the Bat - SOC entit…
-
## Version of the Custom Component
v.1.10.0b4
## Configuration
```yaml
Standard install - H1-5.0-E Inverter connected via Ethernet
Master Version: 1.48
Slave Version: 1.02
Manager V…