-
Hallo Zusammen,
Ich habe einen Vorschlag für einen (möglichen) zusätzlichen Use Case:
Der Fronius WattPilot dürfte die AC-Ströme die vom SmartMeter übermittelt werden für das Load Balancing verw…
-
In the Homey Energy overview, my Fronius smartmeters appears with negative values for current powerr. As a result, its consumption is not accurately accounted for. How can I address this issue or adju…
-
Doesn't work with Victron Venus 2.8x. 2.80 provides only Python 3.
-
Hello,
i have an inverter (fronius) and a smart meter.
The smart meter itself is read through the inverter with no problem.
Sometimes, though, i have a AsyncTCP kernel panic fault (i assume it is f…
maxdd updated
5 years ago
-
If I run the script manually via service/run there isn't any problem (see attached picture).
If it runs automatically after reboot it works for around 10 minutes and the values will not update anymor…
-
Hey ,i'm Peter from Germany ,sorry for my bad English
I had IOBroker on an Raspberry Pi 3 B+ running ,and with the Modbus adapter I communicate with a Fronius inverter, which works very well.
The Mo…
-
Moin,
erstmal vielen Dank für die Integration!
Leider wird der Growatt mit meinem Fronius zusammengelegt in der Übersicht in der Remote Konsole. Also die Summe der Werte Stimmt.
Unter E…
-
Iam absolutly unsure what i see here. Can someone comfirm that? I own a 3 Phase System.
https://youtu.be/X68T2uLwG5A
Thanks.
-
The Fronius Smart Meter appears in the device list, but is not displayed as an AC load. The problem occurs with the Venus OS v2.92
-
Hi,
I'm interfacing with Fronius Inverter and Fronius Smartmeter over modbus. Both devices are available on the same IP address, but have different modbus device id. Is it possible to add one more …