-
https://github.com/motla/ftdi-d2xx is a fully Node.js built driver for D2XX devices.
-
Reported by JCM in the forum.
Just a quick bug report (is there a bug system?) that the FTDI code doesn't currently handle multiple devices well. If I have my TinCanTools Flyswatter (2) attached also…
-
**Is your feature request related to a problem? Please describe.**
I fired up my FTDI cable (C232HM-DDHSL-0 -- 0403:6014:FTUJK2JU (FTDI)) connected to my RP2040 but it gives the error that SWD isn't …
-
I 1st tried ft232h-app to enable SPI but got a kernel crash. See dmesg.txt
I also saw this error, so I tried manually inserting the modules, but it didn't make a difference
_cat: /tmp/irqper: No su…
-
In PR #71, a change was merged to relax the valid input range in function set_latency_timer from 2-255ms to 0-255 ms, as the datasheet for device FT2232H says this is permissible.
Unfortunately thi…
-
Thanks for the effort getting Gen3 devices supported! I'm running into an issue though.
Followed the instructions:
- Updated to Shelly FW 4.2
- Downloaded mgos32-to-tasmota32-Mini1PMG3.zip
- Sel…
-
I have a cable which is labelled 'C232HM-DDHSL-0', by default this loads the stock 'ftdi-sio' driver and would NOT load your I2C driver.
It seems that it has a different product ID
```
$ lsusb -v…
-
### Checklist
- [X] I have searched the [issue tracker](https://github.com/fyne-io/fyne/issues) for open issues that relate to the same feature, before opening a new one.
- [X] This issue only relate…
-
I have several FTDI cables that I am working on and I need to connect and disconnect them on a regular basis. The way I distinguish them is by assigning every one a different Serial number [You can do…
-
I am not sure if this is the right place to post this issue.
I am having issues using the following device -- Digilent Analog Discovery 2. This uses a FTDI chip and connects over USB to the Pi.
[…