-
Dennis, are there any plans to add support for the FCDP+ in the future?
73, Robert
-
I have been trying to BladeRF x115 work with SDRSharp without any luck. I tried with both a windows7 and a windows 10 machine but couldn't get it to work. I followed the following youtube link first.
…
-
If funcube dongle is configured in gqrx right after starting a message appears: "boost::too_many_args: format-string referred to fewer arguments then were passed - Please select another device". Funcu…
-
The frequency correction set in GQRX to an FCD or FCDPP is only applied as integral ppm values, such as 1ppm, 2ppm, 3ppm &c. The consequence of this is that at 1296MHz, the compensation is quantised t…
-
On some systems, the kernel driver will erroneously report "not enough bandwidth" when the Funcube Dongle Pro+ is attached to a USB2 or USB3 port, leaving the fcdpp unusable.
To check whether you hav…
csete updated
2 years ago
-
In windows7 Funcube Pro plus dongle is recognized as an audio device.
Using Zadig does not help either.
Any ideas ?
-
The automated MacOS build uses gr-osmosdr from Homebrew:
https://github.com/csete/gqrx/blob/2cdb903cec6883e9892c83239ada4bac6bb8fad0/.github/workflows/build.yml#L84-L85
Unfortunately, this packa…
-
There have been repeated failures from:
- a flooded Pelican case
- a GPS cable chewed through
- an overheating beaglebone due to poor heat transfer of **computer inside box inside box inside box** …
-
I've running a little script to get 15min continuous data from an Airspy R2 device, at HF-UHF frequencies. The system is Ubuntu 18.04 on a HP Stream netbook.
I don't know why I get this errors, ti…
-
Hi @fventuri
I want to connect a HackRF One device with my NVIDIA Jetson nano. I have GNURadio 3.9 and SDRPay API 3.07 currently installed.
I used "https://github.com/osmocom/gr-osmosdr" and follow…