-
## Expected Behavior
I expect to be able to utilize the secondary IP addresses assigned to my VPS for port forwarding. These IPs are forwarded through GRE tunnels to my OpenMPTCProuter, and I should …
-
**Describe the bug**
I use anti-ddos service for ipv4 via gre tunnel and collector can't collect logs
![image](https://github.com/dmachard/go-dnscollector/assets/92435079/6727b2ad-89fb-4292-951b-9…
-
Currently, many tunnel types do not create conn entries. I believe the root of this issue is #3915 and if that behavior is resolved, this issue would be mostly resolved. Currently, VXLAN and GENEVE tu…
-
**Important notices**
Our forum is located at https://forum.opnsense.org , please consider joining discussions there in stead of using GitHub for these matters.
Before you ask a new question, we…
-
Drive GRE tunnel setup using Ansible. Make it compatible with GENI topology setup - if GENI has already added a link between two nodes then use that.
-
There's something off with this :-)
The tunnel_parent `ClEkJM2Vm5giqnMf4h` is used for *both* inner connections. If you look at the pcap, however, the inner DNS connection is tunneled…
-
## Steps to reproduce:
1. Create a GRE interface in Network → Interfaces named `gre`
2. Attempt to create a second GRE tunnel with a different name
## Actual behavior:
Lucy throws an error in …
-
**Is your feature request related to a problem? Please describe.**
Every VPN protocol is getting blocked, so either I have to use v2ray or GRE tunnel and v2ray does not support router-wide routing, s…
-
Using top of master branch 8/25/17.
First example using GRE light-weight tunnel between eth0 on invader1 to eth0 on invader11 (i.e. no tomahawk involved).
On inv1:
```
ip link add tun0 type …
stigt updated
6 years ago
-
**Is your feature request related to a problem? Please describe.**
In tunnel protocols like GRE, the outer layer protocol's IP and port are always the same, resulting in network packet reception bein…