-
### Feedback
the yale access bluetooth integration recommends connecting some locks via homekit to enable push notifications https://www.home-assistant.io/integrations/yalexs_ble/
it suggests crea…
-
### The problem
Hi,
The connection between my Netatmo Weather station and Homekit is dropped 2-3 times per day.
It only start to work again when restarting the Netatmo Weather station main unit.
…
-
### The problem
I cannot provision the preferred thread credentials to a Nanoleaf Essentials Homekit Lightstrip (NL55). Steps to reproduce:
1. delete device, restart HA, run "Recorder: Purge entitie…
-
### The problem
My initial issue (integration completetly forezen wihout any indication in the sensor status in HA) with FP2 after upgrading to 2024.8 was resolved by @bdraco with introducing the new…
-
I have a device that supports HomeKit (motion sensor, Aqara FP2).
Is it possible to link that device directly to this library?
I mean something like this:
```java
var homekit = new Homek…
-
### The problem
The problem is based on the MYSA Thermostats. I used to have them to work until last spring and I can't remember exactly from when.
I have 5 of them and sundently I could not set th…
-
### The problem
Hello,
I have an integration via Homekit for 3 Mysa AC Remotes.
When I manually select Dehumidify/Dry within the Mysa app, it shows as 'off' for HVAC, but 'On' for Fan. When I …
-
### The problem
**Description**: I have an Atag One Zone thermostat integrated into Home Assistant (HA) via the HomeKit Controller integration. Previously, the thermostat reported temperatures with d…
-
### The problem
I'm trying to migrate a Fibaro CO Sensor from HomeKit to Home Assistant.
I removed the sensor from HomeKit and after resetting it, it shows up as Discovered in Home Assistant, via …
-
### The problem
I have been using 6 Onvis CT3 sensors for a year now. In the past, I was able to add the devices to Home Assistant in the following way. First, I added the sensors to Apple Home via t…