-
I am using a 128x64 with ICN2038S. I am not able to clear the screen completely.
All the pixels seem to dimly lit. It disappears if I disconnect and reconnect my ESP32 from the HUB75E.
HUB7…
-
**Panel description:**
LED P5 OUTDOOR RGB SMD2121 HUB75 64x32 1/8 Module
**Dimensions (in pixels):**
64x32
**Scan factor:**
1/8
**Chips on rear side:**
ICN2012, ICN2037BP, MW245B
![CHIPO…
-
I'm having a lot of issues with 64x32 matrix with a 1/8 scan rate, in this code I am trying to draw a simple white border around the matrix. I am driving the matrix with a Adafruit Matrix Portal S3.
…
-
Some ESP32-based boards meant for the HUB75 lib include a LDR photoresistor attached to pin 35 (or 34) to perform automatic brightness control according to ambient light.
An example of such boards …
-
I wrote program using hub75 package. but, it didn't light up. So I have tried to fix hub75.
As a result. It light up as expected. And Environmental information is here. -> https://github.com/ehime-iy…
-
It would be nice if the base HUB75 class would support the concept of a night mode. If this mode is enabled, all drawings to the display should be done in a (user defineable) color - preferrable a sha…
-
I launch by placing 4 panels on top of each other. Connection from bottom left to top.
In the first lower module, the x coordinates are the same, and in the 3 upper ones they are shifted by one pixel…
-
Hello!
I have led matrix 128x64 with ICN2038S. It works well with the receiving card Colorlight 5A-75B.
https://www.youtube.com/shorts/qVjnT78mICI
When I used the library I got graphic distortio…
-
The picographics text method accepts an angle parameter which is incredibly useful if you are working on a 128x64 board that you have to change the rotation of everything by 270 degrees to make it loo…
-
Thank you for providing excellent. WLED provides an excellent software framework that allows users to customize functions。
**Describe the solution you'd like**
HUB75 is a common LED matrix panel …