-
I want to communicate with the Open Bootloader using the I2C interface, so from the host side, I executed i2cset -y 6 33 33 to the MCU, with the goal of making it jump to the application. After execut…
-
Hello, I am trying to implement Bitbang I2C protocol in the bootloader. I was not able to find any code that would work for any bootloader. After that, I have found an Arduino Bitbang I2C library whic…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I'm running ESP-IDF v5.2.1-dirty and I'm not able to get the demo to compile using `idf.py build`
Steps to repeat this:
* Install ESP-IDF v5.2.1-dirty (this is the latest version I think, I instal…
-
@deanm1278, @tannewt really want to say I love the work on seesaw and have a technical proposal for improving the offering. I think the world needs a solid I2C-based bootloader that can be easily trig…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I2C is not working using PA08 and PA09 on the ATSAMD21G18A-AU with an Arduino Zero bootloader on a custom PCB.
-Tried Modified I2C Scanner
-Normal I2C on PA22 and PA23 still work
-
After some tweaking, still cannot use the uart.
i have changed the display to an i2c display (so no shared pins). Now i can receive data from the radio (TX0;RX0;IF and so) but seems the radio …
-
## Environment
- Audio development kit: ESP32-LyraT-Mini
- Audio kit version (for ESP32-LyraT/ESP32-LyraT-Mini/ESP32-S3-Korvo-2): v1
- [Required] Module or chip used: ESP32-WROVER-E
- [Re…
-
- [ √] I have read the documentation [Espressif Audio Development Guide](https://docs.espressif.com/projects/esp-adf/en/latest/index.html) and the issue is not addressed there.
- [ √] I have upda…