-
Thought I would share a working configuration for the M5Stack ENV Pro. As I had some trouble finding all the information myself when adding it to a ESPHome. This is a stripped down version of [this](h…
-
Hi there,
first of all thank you @wichers for this great component.
It is working perfectly if I connect the ESP to my Comfoair 180.
However, as a next step, I wanted to also hook up the ComfoSen…
-
I have a Jandy RS board (Yg / 4.3.13 firmware), that was the upgrade for the iAqualink 3 (since I previously had a PPD PDA chip). I also have a Century Variable Speed Motor (that acts like an ePump on…
-
Indoor air quality data for the BME 680 sensor.
0-500
![Image](https://github.com/meshtastic/design/assets/1795163/fdf33cd8-c83f-4eb0-8754-2b4f79237631)
![Image](https://github.com/meshtastic/desig…
-
We need to get a sampling of data for all the devices. Here is a list of what is required. See the wiki on how to gather the data. Make sure to remove the personal information (i.e., `id`, `serial_num…
-
I have a newer PDA panel that has some support. If I patch out this check below I start seeing iAQ Touch interactions. I was going to look into it and see if I could make it more functional.
@sfe…
-
Describe user stories (what you would like to do with Pilot IAQ DB?) @Botato12
-
Hello Timothy,
I´ve been running your BSEC Conduit for quite a while now and it´s working stable.
However, the IAQ returned by it to home assistant is always 0.0
Have you had this problem as …
-
Hello,
I have been using Paxcounter for quite a while. Today I connected the BME680 for the first time. It is very nice that it sends the IAQ value.
Is it possible to show the IAQ status by LEDs. Fo…
-
Add service to model gas reported by bme680
don't report iaq