-
## Steps to reproduce
Attempt connection to an IC-705 (or other modern Icom radio) using the incorrect serial port. (For example, on my MacBook Pro, `/dev/cu.usbmodem143201` is the CI-V port and `/…
-
Hi :-)
Could this faboulous project be used to output CI-V to steer my new JUMA amplifier from the IC-705?
It has a standard 3.5mm jack used for CI-V.
Thanks
73
Frank
DL2CC updated
3 weeks ago
-
Sorry for bringing this up as an issue, but I do not seem to be able to connect to an IC-705 over WiFi using rigcontrol. Using the following command line:
`
rigctl -m 3085 -c 0xA4 -r 192.168.1.254:5…
-
I don't know if there's any interest in it, but it seems to me it wouldn't be terribly difficult to add Icom (and possibly) support. The ATU-100 would probably work very well with the IC-705.
I'd t…
-
Version: rigctld Hamlib 4.6~git 2024-09-29
OS: Windows 10 x64
Radio Icom IC-707 via XGGComms USB-Digimode-4 on COM4.
### Very brief tl;dr:
There seem to be a couple of mistakes in the IC-707 r…
-
I got this running on a IC-905 using USB/Proxy method no problem. The 905 has some extra meters or changed meters (like voltage that changes for the microwave bands) but the common stuff seems to wor…
-
e.g. IC-9700 has a network port for CAT control
Protocol is not CI-V and need manual for the network protocol.
-
Hello, I found your project around Christmas 2023 having just acquired an IC-705 myself.
I have been playing satellites for a few years now using an ic-9700.
Your app is just brilliant, the idea t…
-
**Describe the bug**
After starting TouchPortal and connecting to my tablet, many of the radio adjustment buttons don't show any command status, they just end in a double question mark like "AGC ??".…
-
**Describe the bug**
On my Android tablet, I loaded up the page samples and tried pressing Freq Up, MYCALL, SSB, Run, etc. But none of the buttons are having any action in N1MM+ and my rig doesn't d…