-
Hello,
I am new to a development with AD7606 and I am trying to run the example given in the repository: "pyadi-iio/examples
/ad7606.py".
The example shows an error on the line "sc = ad7606.scale…
-
Hi, is it possible to show IIO devices in sensors output?
Example, I2C, BME280, using kernel module `bmp280` on 0x76. Kernel: `6.1.0-rpi7-rpi-2712`, `sensors version 3.6.0 with libsensors version 3…
-
This will be useful on tablets and phones to test for accelerometers, compasses, quaternion sensors, etc.
In particular, accelerometers will behave differently if they have a "trigger" or not, if the…
-
Test with example high speed ADC:
https://community.nxp.com/t5/i-MX-Processors/An-adc-using-an-imx6ull-processor-enables-continuous-acquisition/m-p/1719805
-
I have been facing the following issue since 3 months, on cloning the analog devices github links when building petalinux project. One of these types of errors is as follows:
_ERROR: libad9361-iio-…
-
When un-docking the AYANEO 2S I noticed this error pop up.
```
[2024-05-20T02:09:44Z ERROR inputplumber::input::source::iio::iio_imu] Error running IIO Driver: Nix(ETIMEDOUT)
[2024-05-20T02:09:44…
-
I think that the `ConditionPathExists` in the systemd service file ([permalink](https://github.com/analogdevicesinc/libiio/blob/3dba1847dfaaa24406110d2fc21d3bc8cad67f96/iiod/init/iiod.service.cmakein#…
-
The IIO USB device nodes are set to mode 666 in `libiio.rules.cmakein`:
> SUBSYSTEM=="usb", PROGRAM=="/bin/sh -c '@CMAKE_INSTALL_FULL_BINDIR@/iio_info -S usb=%s{idVendor}:%s{idProduct} | grep %s{id…
-
Hi,
I'm porting the `asm330lhhxg1` on my embedded system device(Linux/arm 4.9.257). I am attempting to use the IIO buffer to continuously read data at its `sampling_frequency`. However, the process…
-
Hello and Happy new year!,
I'm using the LSM9DS1 sensor and i added the st_imu68 IIO driver into my kernel.
https://github.com/STMicroelectronics/STMems_Linux_IIO_drivers/tree/linux-4.14.y-gh/dr…