-
Hi
I am playing around with a camera I have laying around, I think we identify this as an xm510. I got telnet access with the Snawoot/hisilicon-dvr-telnet tool.
I tried to download the ipctool b…
-
Hi, any chance of some instructions on how to run ipctool from an sdcard, serial connection or from micro USB? Im having trouble setting up a tftp connection.
-
## Problem
There are **3 sensors** in the openipc repos that have the **same chip ID `cb3e`** and are all seen as `sc223a` by ipctool.
- [sc223a](https://github.com/OpenIPC/openingenic/blob/3a9fdfb…
-
Unable to handle kernel paging request at virtual address 000e0110
pgd = dde44000
[000e0110] *pgd=9de07835, *pte=00000000, *ppte=00000000
Internal error: Oops: 817 [#1] SMP ARM
Modules linked in: …
-
Hi,
first THX for this project. I have here some Cameras I wanted to use, but the web interface needs Adobe Flash. So I looked out and found your wonderful project. I installed it on this board.
!…
-
Is IPCtool missing from the recent builds of 3518ev100?
And also I noticed that there seems to be support for the TI DM36x chips, but what build are they packaged with? I don't see anything for TI…
-
Hello Adrien,
Unfortunately, the signal camera_detection does not work for me. It always stays on when camera_alarmmode is on and always off when camera_alarmmode is off. Camera_detection doesn't see…
Goo15 updated
10 months ago
-
```
---
chip:
vendor: HiSilicon
model: 3516CV300
ethernet:
mac: "00:13:02:01:f9:c3"
rom:
- type: nor
size: 16M
block: 64K
partitions:
- name: boot
size: …
-
Hey guys!
I have an old ZMODO ZP-IBH15-S camera with a 3518CV100 and (possibly) a JXH22
Running `ipctool` on the **original** firmware shows this output:
```
# ./ipctool
---
chip:
vendor:…
-
This is Issue will serve as an open discussion to collect important information in one place. We absolutely **NEED** to find out **how to pass an OEM_HOOK_RAW request from command line and read the re…