-
尝试过5.15 5.4 4.4等版本均无法启动,报错如下图,貌似是找不到闪存
![0766c05f2813db38fb5ce7d699bb07e](https://github.com/user-attachments/assets/d7e0d5b3-3dfa-4f20-bacb-01da245a6a26)
而原版小米系统启动如下图
![a7cc839641da7eaae6e7950d0bd…
-
Hi there!
I wonder if anyone could assist me in adding support for "ipq50xx" ?
It's supported in "wlan-ap" as seen here
[https://github.com/Telecominfraproject/wlan-ap/blob/main/feeds/ipq807x/i…
-
https://lore.kernel.org/all/bce3dd3e-4eb2-4916-86a4-f0554007f9d0@quicinc.com/
-
Hi there, i found you built a firmware based on qsdk 12.1 for ax6 on enshan forum, can you try with xiaomi ax3000 ipq5018? i'm trying to build a working firmware using qsdk12.1 for this model but wifi…
-
看到你也在研究 IPQ5018,我最近也在搞这个,但我水平实在太业余,网上找到一些源码算是编译出来了,但因为试的机子是 PZ-L8,使用的是 ESMT F50D1G41LB 闪存,启动时就识别不正常,前一句还正常识别nand: device found, Manufacturer ID: 0xa1, Chip ID: 0xa5,后面就是nand: unknown nand 2gib 1,8v 8-…
-
```
root@fritz:/var/mod/root# bootslotctl get_active
0
root@fritz:/var/mod/root# bootmanager debug verbose
yf_bootmanager version = 0.8.6-202301141521
>>>>>>>>>> device configuration from EVA loa…
-
感谢某F,某P,某M,某H,某Y使这个项目得以实现,庆祝一下🎉
-
由于智能家居需802.11b only及wpa加密才能连上,目前这个固件设置2.4G wifi为legacy,设置wpa加密方式,手机无法连接,wpa/wpa2混合加密可以连接。求教是不是我设置问题。
Livxx updated
6 months ago
-
**What would you like to be added**:
My use case is to scan my host filesystem and get the Linux distro information alongside with the host packages and their versions. Unfortunately, indexing the en…
-
AX3000(M81、RA81)刷入最新的几个固件(老固件没试),全都是一开无线,就过一会自己熄灯断网,ttl输命令无反应,测电压txrx1v,vcc1.8v
补充:是2.4G无线中继后开启2.4G无线