-
Hi, it doesn't work with arduino nano. Here is such a mistake
FQBN: arduino:avr:nano:cpu=atmega328old
Using board 'nano' from platform in folder: C:\Users\ANDREAS\AppData\Local\Arduino15\packages\ar…
-
Would be able to get gear position??? K-line is the serial debug port.
http://forum.arduino.cc/index.php?topic=236092.60
-
Volkswagen (used to?) use a proprietary CAN transport protocol for diagnostics in the post-k-line cars, but the contents are just standard KWP2000.
Depending on how modular the code is, it may be p…
-
# Steps to reproduce
Connect to an ECU which communicates using KWP2000 over K-line and perform a `ReadIdent`. ECUs I have tried (all of them in a 2005 Audi A4, type 8E/B7):
* `0x37`, Radio/navi…
-
I'm trying to read ABS/VDC but failed with the following log:
```
Serial Pass-Through checkbox Prefer enabled
SSMP1communication::run(): operation: readRomId
SSMP1communication_procedures::s…
-
```
What steps will reproduce the problem?
1. Loading an .a2l file causes one problem
2. Loading the hex file causes the other.
3. Likely my fault, just want to know.
What is the expected output? Wha…
-
```
What steps will reproduce the problem?
1. Loading an .a2l file causes one problem
2. Loading the hex file causes the other.
3. Likely my fault, just want to know.
What is the expected output? Wha…
-
On my 2002 Pontiac Bonneville, I can see that a connection is made to the OBD2 port but no DATA is received when requesting PIDs.
Here is some debug output (added huge timeout in desperate attempt):
…
gmas updated
10 years ago
-
```
What steps will reproduce the problem?
1. Loading an .a2l file causes one problem
2. Loading the hex file causes the other.
3. Likely my fault, just want to know.
What is the expected output? Wha…
-
ISO 15765-4 and SAE J2284
probably https://github.com/openxc/uds-c