-
Using 8 out of the box new `Arduino Nano RP2040 Connect` boards, I have a problem with all of them concerning the library [WiFiManager_NINA_Lite](https://github.com/khoih-prog/WiFiManager_NINA_Lite).
…
-
I have an Mbed application (mbed-os-5.11.1) based on the STM32L471QG.
I am using a ST M25P16 2MB SPI FLASH which has 32 sectors of 65536. With LittleFS this apparently constrains the minimum file s…
-
Following testing with both Renesas configurations (Portenta C33 with Vision Shield & Breakout) as well as mbed (Portenta H7 + Vision Shield), it is observed that the maximum path length is 255 charac…
-
Hi all,
My issue is related about #421 #11 #536 #422
I am testing littlefs on Macronix SPI NAND in mbed OS.
I test with read_size, .prog_size and .cache_size = 2048 bytes.
I try writing a…
-
### Description of defect
Summarized the test coverage report in the below table:
| FileSystem | % covered | Refer to Unit under test |
| ------------- | ------------- | -------- |
| FileSyst…
-
The filesystem for storing some useful data (maybe, pictures for different app notifications or schedule of alarms ).
Steps
- [ ] Implement the driver for on-board SPI flash.
[W25Q16BV_Winbond.…
-
In couple of posts and the mbed after hours video from 2018, it was mentioned that some kind of USB access was in work.. however I can't seem to find any reference to that since then ...
Has there…
-
### Description of defect
When opening a file with the mbed C++ `File` API using the O_APPEND flag on a littlefs, the behavior is unexpected. Generally (and in the case of opening a file with the…
-
Dear all,
I use the nRF52840 DK with Segger Studio and a Micron SPI SLC NAND 2Gb (256MB) Flash memory. I have already implemented the basic write read and erase functions for the NAND chip and the…
-
Using master version:
https://github.com/maclobdell/simple_mbed_test_runner/blob/master/run_all_tests.py
Modified build options to use -DMBED_TICKELESS
I see (1) a greentea error and (2) runner e…