-
https://github.com/kinsamanka/OpenStick-Builder/blob/f09298ca4c8212618417b2f76369b6e206f7c36b/scripts/build_hyp_aboot.sh#L9
The model also can be "thwc,ufi001c". Do you want to add an opinion for t…
-
We have MTK lk source code here
https://github.com/Gigaset-dev/lk2
However, for devices with secure boot enabled, modifying the primary bootloader is not an option. The only feasible approach is t…
-
When booting U-Boot with `lk2nd.pass-simplefb=uboot` command line, the following exception is triggered in lk2nd:
```
[670] simplefb: switching to xrgb888 because u-boot can't do 24
[720] data ab…
-
According to my knowledge (and what https://wiki.postmarketos.org/wiki/Qualcomm_Snapdragon_650/652/653_(MSM8956/MSM8976) ) says, Xiaomi kenzo and Sony suzu/kugo are MSM8956 devices; however they're li…
-
Hello! This technically isn't required for Android, but please somehow make markw hardware revisions with the `atmel,maxtouch` touch panel work in the dt. This is required for pmOS. Thanks.
-
`fastboot boot` or `fastboot flash boot ... && fastboot reboot` **with lk1st** always cause `DTB offset is incorrect, kernel image does not have appended DTB`, even with lk2nd image.
lk1st was instal…
wctrl updated
4 months ago
-
Hi, i'm trying to install postmarketOS on my Galaxy A5 (2015) and i'm trying to install lk2nd through heimdall and it will not boot to lk2nd. If i try holding vol up + power it just restarts.
-
Following the README steps does not work for me on my samsung-a5:
```
fastboot flash boot build/thirdstage.ext2
```
lk2nd log
```
[10] platform_init()
[10] target_init()
[20] MMC card: R…
-
I was able to flash lk2nd with heimdall, thanks! It boots up and say MODEL - Unknown (FIXME!). I had to disable driver signing and add ```%SingleBootLoaderInterface% = USB_Install, USB\VID_18D1&PID_D0…
-
Hi how can i install this on samsung galaxy a5 2016?
In os phone dev option on and oem enable an debug us enable.
And than pwr off start phone with the pwr buuton home key volume - i get download …