-
Hi,
I recently built a diy tracker on esp32 and Ebyte E220 400M30S (LLCC68)
The problem is that it doesn't start, I keep getting this error:
Starting LoRa failed! State: -2
Everything is wired rig…
-
W (402) MAIN: Disable TCXO
E (5322) task_wdt: Task watchdog got triggered. The following tasks/users did not reset the watchdog in time:
E (5322) task_wdt: - IDLE0 (CPU 0)
E (5322) task_wdt: Tasks…
h4alo updated
1 month ago
-
In new firmware with a web configurator, AP doesn't start after save config and rebooting.
Tracker works fine if all parameters were set correctly, but no more AP
Tested on T-Beam v1.2 and ESP32 Wem…
-
### Please ask your question
I have a few of the DL-LLCC68-S 915MHz LORA modules from [LCSC](https://www.lcsc.com/product-detail/LoRa-Modules_DreamLNK-DL-LLCC68-S-915_C2894791.html) and I'm planning …
-
I'm using a DreamLNK LLCC68 915MHz SPI LORA module available from [LCSC](https://www.lcsc.com/product-detail/LoRa-Modules_DreamLNK-DL-LLCC68-S-915_C2894791.html) and I'm having trouble getting it to w…
-
Hello,I am using LLCC68 now, because SF=7BW=125K, frequency hopping is necessary to pass FCC certification, can LLCC68 use this code? If you can't use LLCC68, is there any other solution to make it ac…
-
Hello! I would like to consult LoRa using the LLCC68 module?
-
Hello,
I have a LoRa RA-01SC module, it is based on LLCC68 and i can't get it to work with LoRa APRS
Would it be possible to add support for these?
-
My system works with E220-400M22S and E220-400MM22S on various controllers like STM32F7, ESP32 with LoRaRF Arduino library.
I am able to receive and transmitt.
Trying to make it work with RPi with n…
-
I can use LLCC68 module to send data normally, but if I combine the receiving and sending code together, after the sending code is executed, the serial port will print the received garbled data
![企…