-
I encountered an issue with an older RAK v1.5 where the concentrator reset pin was 17 instead of 25, which is the default specified in the variant file for COMP-RAKHM. This was causing an endless loop…
-
Greeting,
I am encountering difficulties with GPS synchronization in the Lora gateway. My hardware setup is: Raspberry Pi 3B+ and SX1302 LoRaWAN Gateway HAT by waveshare. I've successfully connected…
-
I'm only getting uplinks from my end devices when I start the packet forwarder on my sx1302. But I also want to see the downlink replies from the infrastructure (separate gateway). Is there an option …
-
I'm using a Raspberry Pi 3B+ board with OpenWRT OS (v23.05.2) and trying to use a Semtech SX1302 LoRa Corecell interface board via USB interface to use them as a LoRa Gateway setup (RPi + Semtech SX13…
-
Hello,
I'd like to make networking independent from the packet forwarder app.
I see it happen in following steps:
- #18
- move network configuration handling to a separate file: wip: https://gith…
-
This issue documents a problem report that first was reported on www.thethingsnetwork.org/forums: [Latest MultiTech Packet Forwarder Stops Sending Packets](https://www.thethingsnetwork.org/forum/t/lat…
-
hello!
is it possible to build 1ch GW on RPI4 Ubuntu 24.04 + Waveshare SX1262 LoRaWAN HAT and use it with Chirpstack Network Server for working with nodes based on Heltec Cubecell and RFM95 based n…
-
Hi all,
I want to integrate the sx1302 lorawan packet forwarder with aws server it requires aws key, certifates, trust certificates.
I am trying to configure with sample configuration files am not…
-
Several people are facing problems with the default lora_pkt_fwd packet forwarder when using the gateway with OTAA end nodes and chirpstack.
The problem consists in a JoinRequest and JoinAccept loop …
-
I was testing the Chirpstack network server with mp_pkt_fwd and with original lora packet forwarder. Here, we use AU915 frequencies. I checked that the original packet forwader (Lora-Net) does a fast …