-
i would really love to see a LoRa decoder in Mayhem. It's really a very cool protocol and implementing a decoder is a huge step for Mayhem.
In my opinion a view for receiving LoRa signals and decod…
-
Hello,
I'm having trouble getting RFM95W to work with Arduino Uno and my problems are the following :
**- On the sender setup, sending packets stop at 0, 1 or 2** (LoraSender example, Image1 belo…
-
I am unable to send or receive through a STM32L051C8T7 board.. No failure in setup, but it freezes on `LoRa.endPacket();`, ` hSerial.print("4");` is never called in the code below. It also freezes wh…
-
currently have the rf95_client sending with
` rf95.setFrequency(868.0);`
and ESP32 Lora receivers using Lora library, but not reading any data.
Is the data sent via `rf95.send(data, sizeof(…
-
Hi,
I'm experimenting with the the following modules:
[t-watch s3](https://www.lilygo.cc/products/t-watch-s3?_pos=15&_sid=68efe9dd5&_ss=r) (433MHz)
[LoRa32 V2.1_1.6](https://www.lilygo.cc/products/…
-
I am using two LoRa sx1278 with arduino uno boards. the sender node is working perfectly but the receiver doesn't show any received messages. LoRa initialization is okay in both receiver and sender.
…
-
Hi!
I try to get the library running on an RPi 3b+ with the 64bit OS headless. The board I am using is the waveshare board with SX1262 via SPI and GPS via serial.
When I compare the version if …
-
Hi,
I am sending the lora packets from adafruit feather 32u4( having sx1272 module) to Dragino module. Its working absolutely fine. But when I am sending the packets to Adafruit feather 32u4 (being…
-
Hi,
I'm trying to run the proyect on a Raspberry Pi 4 with Raspberry OS 32 bits with the Semtech SX1262 LoRa Module.
When running the receiver_listen.py or receiver_continuous.py shows the foll…
-
I am following the instructions for viewing LoRa, but am getting the error "AttributeError:Module 'lora' has no attribute 'lora_receiver' and am unsure how to remedy. Any help would be appreciated =-)…