-
I noticed that in defining the ports(specifically for a Pi), the code says
#CLIport = serial.Serial('/dev/ttyACM0', 115200)
#Dataport = serial.Serial('/dev/ttyACM1', 921600)
The presence fo the…
-
Hello!
I'm trying to use Ollie with macOS Monterey as a usb-serial adapter, but it looks like default drivers are not working, and the ones available from the MaxLinear website are from 2013 and not …
-
img size can be truncated to < 7.5GB, partitons is not bigger than that, lots of empty space. It would make it fit on a 8GB SD card.
`truncate --size=$[(15693823+1)*512] nibepi_1.1.1.img`
```
…
-
There has been a considerable discussion in the past couple of days about a device called the Tzumi MagicTV. This is an Atheros-chipset OpenWRT device connected to an RTL2832P, which seems to be used …
-
-
will this util be supporting G.hn, or has it already done so? if not, are there G.hn utils somewhere?
new to HomePlug and G.hn.
-
### Describe the bug
I am writing this issue after several desperate attempts to figure out what happened to the test Zyxel EX5601 (OpenWrt), which I own.
I have a 2.5Gbps connection FTTH with Zyx…
-
Need to replace Ethernet switch IC in TRX module due to its unavailabilty. Two options are identified which fits the required form factor:
1. QCA8334 from Qualcomm
2. BCM53134PKFBG from Broadcom
…
-
### Describe the bug
I have a cisco core switch with eee enabled. I get multiple Network device 'eth0' link is down and Network device 'eth0' link is up every day, as soon as I disable eee on the c…
-
**Describe the bug**
There seems to be a bug on raspberry pi 3b+ with lan7515 chips where auto negotiation on the Ethernet fails to work after some random period.
**To reproduce**
We are using th…