-
Hello All,
Thank you for the ACAN2517FD library provided for Arduino uno. I have tried Arduino uno loop-back demo code and configured all Arduino SPI lines to MCP2517FD click module,but below menti…
-
Hello everyone,
Is anyone did interfacing MCP2517FD module with TM4C123gxl(Tiva launchpad) micro controller ?
Please help me if anyone has done this project.
-
Hi pierre,
First of all, thank you for your development of such a powerful library regarding CANFD.
My issue here is that I can't recieve CAN2.0 messages using a innomaker usb2can device. The cod…
-
unable to compile:
[ 66%] Building C object CMakeFiles/firmware.dir/main.c.obj
In file included from /pico/micropython/ports/rp2/canis/candrivers/mcp2517fd/mcp2517fd-types.h:23,
fr…
-
Hello, I am trying to use socketcan with your project for my research.
I have connected MCP2517FD to Raspberry PI 3B+ as follows:
GPIO9 -> MISO
GPIO10 -> MOSI
GPIO11 -> SCLK
GPIO8 -> CS
GPIO2…
ghost updated
4 years ago
-
I'm trying to use SPI1 instead of SPI0. I'm using the mcp2517fd-spi1.0-can2-overlay but dmesg is giving me CRC errors.
pi@raspberrypi:~ $ dmesg |grep spi
[ 4.065147] mcp25xxfd spi1.0: CRC read …
-
Hi, I used savvycan with the SAM3X8E microcontroller, it was possible to combine CAN0 with CAN1 at different speeds and it worked as CAN gateway, now I use esp32 CAN0 and CAN1 on MCP2517FD works great…
-
ESP32 + MCP2518FD Pro board has errors when connected to can network ** and !!
Setup configures the MCP2518 correctly but when connected to can network I get !! and ** in serial monitor.
In code I…
-
Hi @pierremolinaro, nice work on your lib, and his doc!
I was wondering if it was possible to use this library without using the INT interrupt signal. Indeed I plan to connect 8 MCP2517FD, without …
-
Great project!
It would be useful to add a few examples of the use of this library.
Really looking forward to!