-
"may later support MCP320x as well"
So, Eben Upton and co has made 10.000.000 RP2040, that needs external ADC's to be useful beyond 8 bit.
https://datasheets.raspberrypi.com/rp2040/rp2040-datashee…
-
in this code where can I change for my MCP3208(12bit,8 channel)?
thank you
-
I have been attempting to modify the code and get it to run with the MCP3208.
I have modified both transmission and receiving request like this below.
```
// ADC sample size (2 bytes, with 11 d…
-
Is it possible to specify differential mode for any of the channels? This feature is available in the chip. If not, how about adding it?
Thanks,
Tom
-
Hi,
Thanks for your work on the wiringPD objects.
I had struggled to get the readings of a second mcp3208, until I had realised that the code needed to be adapted for it.
Here's the adapted w…
-
I was unable to receive meaningful values using the current implementation from an MCP3208. I think the implementation of `MCP3x0xGpioProvider.toCommand(...)` is the culprit:
```
private static short…
-
It is my first time using python or another program language,just like the tittle ,how can I know when did the ADC like MCP3208 which uses SPI modle samples the analog data ?
Thanks for your help!!
-
Allowing the passing of a pointer to an SPI bus of the users choosing, so that chips with multiple SPI busses (Teensy, Zero ..) can use the library on the other busses I.E (SPI1, SPI2, mySPI)
-
Setting up the Xiling Spartan-6 involves installing a VM which is capable of running ISE 14.7.
From here we can write the firmware in VHDL if we connect the JTAG to the FPGA.
The development ar…
-
- [ ] 7-Segment-Anzeige (#14)
- [x] DS18B20 Temperatursensor (1-Wire)
- [ ] ESP32 (#13)
- [x] Raspberry Pi
- [ ] RFID-Leser (#12)
- [x] Gertboard
- [x] OLED-Display (SSD1306)
- [x] LCD-Modul
…