-
If the HID-Button-ATTiny85 is already attached to an USB port before the PC is fully started it will not be recognized.
__Remark:__ unknown if this can be fixed because this might be an issue of th…
-
Micronucleus is a bootloader designed for AVR ATtiny microcontrollers with a minimal usb interface, cross platform libusb-based program upload tool, and a strong emphasis on bootloader compactness.
…
-
What is this for? Can i use micronucleus enabled board as ISP programmer to flash other boards?
Have you been thinking about packaging micronucleus with this Arduino package, so i can flash latest mi…
-
I'm using Digispark Tiny85 board. After setup the board and micronucleus programmer (digistamp:micronucleusprog) I try to upload my sketch, but Arduino extension is asking to setup serial port which i…
-
problem is a new pc won't see a HID keyboard but a digi spark (because of no driver). only when the driver is installed it will automatically switch to the HID driver for it to continue with process g…
-
I've written a few tiny bootloaders in AVR assembler, and am thinking of writing a USB bootloader. If there's interest in an optimized version of micronucleus in pure assembler for the avr25 architec…
-
It would be nice to support more than only the usbtiny programmer. Perhaps default to the usbtiny, but allow a command flag.
For example, I use the usbtiny.
```
bash-3.2$ make bootloader
avrdude -c …
-
When using your installation script:
```
git clone https://github.com/micronucleus/micronucleus.git
cd micronucleus/commandline
sudo apt install libusb-dev
make
sudo make install
```
I got t…
-
Lets say i have arduino with bootloader (lets say ATMegaBoot) and i want to flash new version, or completely different binary (eg. Optiboot). Usualy i use ISP programmer to do it. I have to connect pr…
-
I am building a GUI to automate running the command line tool. I would like for my GUI application to be able to detect the version of the application installed on the device. I see the command line t…