-
## Feature Request: Update MKRWAN and mbedCore
The arduino-build.sh file has old versions:
```
$ARDUINO_CLI core install arduino:mbed@1.3.1
$ARDUINO_CLI lib install MKRWAN@1.0.13
``…
-
I have a setup consisting of a Dragino LoRa HAT on a Raspberry PI 3b+, and two Arudino MKR WAN 1300 devices. After installing and running the dual_chan_pkt_fwd software, the gateway was successfully r…
-
This issue was also covered in depth here https://github.com/arduino-libraries/MKRWAN/issues/36 and this problem still persists using the [MKRWAN_v2](https://github.com/arduino-libraries/MKRWAN_v2) Li…
-
After reviewing the various issues with this library and fw https://github.com/arduino/mkrwan1300-fw I decided it was probably a better idea to investigate with the community about the next steps (bef…
-
Hi.
On my MKRWAN-1310, I updated the Murata firmware by running the MKRWANFWUpdate_standalone.ino -> according to the terminal this was version ARD-078 1.2.3
In MKRWAN library, I activated debugging…
-
The MKRWAN library has some flaws regarding the timing and handling of the downlink message. Unfortunatly there is a lot of work to do to improve the library so here are some options:
Use a better …
-
There is no way how to find out port number of downlink message.
If I understand it correctly, port number is returned by modem (https://github.com/arduino/mkrwan1300-fw/blob/master/Projects/Multi/…
-
I'm a bit confused about this repo and how it relates to the MKRWAN repository. Is this an alternatively line of development for newer firwmare versions? Or is it intended for different hardware? Is t…
-
Hi,
I'm new using LoRa.
I got one LoRa mkrwan 1300 and i'm wondering if i can use it as a gateway just to read data from end devices.
Best regards,
Merlin Pineda
-
- Arduino board: Custom board
- Arduino IDE version (found in Arduino -> About Arduino menu): PlatformIO
- List the steps to reproduce the problem below:
Run below sketch, it is expected that…