-
Add support for the FlashForge Adventurer 4 and rebrands (MonoPrice Voxel Pro)
-
Cura 4.8.0 adds a **.0** to the _Printing_ and _Build Plate Temperature_.
![210.0°C Printing Temperature](https://user-images.githubusercontent.com/40121865/97706204-92d88c00-1ab5-11eb-9819-9cab7eaec…
-
when sending to printer adventurer gives file format error
even with extension changed to .G
-
Great plugin! Do you think the Flashforge Adventurer 3 would work?
-
The FlashForge company distributes a closed-source slicer, FlashPrint, for their 3D printers. For printers that are equipped with a touchscreen, FlashPrint makes .GX files for download to the printer…
-
~~Stock mainboard can be supported by running Klipper, Mainsail, and Fluidd off of the original Mediatek MT7688 running a somewhat modified OpenWrt installation. This requires a good understanding of …
-
It should be possible to, in lieu of removing the entire daughter board assembly, prevent it from booting by soldering a jumper between its reset pin and ground, or by bridging its oscillator to groun…
-
The Monoprice 135881 printer has been unavailable for about a month. The other alternative is out of my price range. Can you recommend another beginner printer which will work with Jetbot files in t…
Whs02 updated
2 years ago
-
### Application Version
4.11.0
### Platform
Mac
### Printer
Custom FFF Printer
### Reproduction steps
1. I am using a MonoPrice Voxel.
2. I have been playing with the ChangeAtZ 5.2.1(Experimen…
-
### Application Version
4.9.0
### Platform
Linux Manjaro
### Printer
Monoprice Voxel
### Reproduction steps
The same STL files, on 4.8 prints well like on eralier versions, on 4.9 print starts…