-
What Mosfet do i need for my 5v light strip? and im powering it from the vin pin on the 8266
-
-
Hi!
I just want to tell you that I really appreciate the work you put into this project. It seems like one of the best engineered DIY stations on the internet, so thats why I'm trying to design a ver…
-
The solutions are:
1: Ignore
2: Put the MOSFET on the source instead
3: Use the 5th 7W2 wire for MOSFET control
Option 2 is the most robust, but having the MOSFET on the source key means the load key'…
-
## Environment
- Klayout Version: not applicable
- OS/Platform: Ubuntu 22.04
## Actual Behavior
I tried to do a noise simulation of a single common source transistor, but found the noise to …
-
Hi, me again. I promise I will stop breaking stuff soon.
I couldn't figure out why the test for the Mouser API kept failing but the API key was correct and search worked. Turns out that the part used…
-
Hello Kushagra Agarwal,
I have read the MOSFET_Optimization (https://github.com/kushagragarwal2443/MOSFET_Optimization) that you uploaded to Github, and I have a question for y…
-
What about the https://www.infineon.com/cms/en/product/power/mosfet/n-channel/isg0613n04nm6hsc/ ? it got less resistance and lower gate capacitance. There are also other ones with a bit higher capacit…
-
I found no version of the BSS84 that has a typical (not to mention a maximum) RDSon below 1Ω (at VGS=-10V, let alone at VGS=-7.5V) as required by note 5. For the BSS84 specimen mentioned in the BOM, R…
-
Good morning
I'm working with a ramps 1.6...
I enabled "COOLANT_FLOOD" on pin 8 and "COOLANT_MIST" on pin 9.
Is it possible to also activate pin 10 in parallel with pin 9, to also activate the thir…