-
I'm sorry for stupid question but I can't find ...
How to add translation to the states/states details? I have a json file in custom_components/indego/translations/ but nothing changes, everthing i…
-
### Describe the issue
Mowing via automation no longer possible after update to core-2024.7.1. Command for start is no longer offered in the automation. See screenshot in German.
![2024-07-09 15…
-
多个mower进行任务时,其中一个任务完成关闭模拟器并断开adb连接,会导致其他未完成任务的mower对其使用的模拟器也断开链接。
我认为原因在adb_client/core.py中对kill-server的错误使用。
我认为其逻辑应该是如果adb进程中注册了多个devices,则关闭对应的device,shell命令是adb disconcert [ip],如果只有一个device号则kil…
-
When the battery is full, the charger floats the battery.
When the battery drops below 18.9V, the charger tops the battery off.
18.9V corresponds with approximately 60% battery level. The mower refu…
-
Hello, I noticed the following: After about 3 hours I can give commands to the mower, but I no longer receive any status messages. Only a deploy from Node Red solves this! Can a timeout be set up for …
-
Hello, first of all very nice that the integration is available and thanks for the time you are spending in dev.
My mower is connected and I can see all values like battery, status and so far.
But…
-
Configuration node works fine and apparently finds the location, yet in the mower node it issues "Failed retrieving Gardena Mowers". It's a Smart Sileno 1600 if at all that matters.
-
Good morning,
I tested with the A1 robot lawn mower and I managed to retrieve the status and battery level.
How could I retrieve the correct commands (Start, Stop, ...)?
thank you
-
When the grass is too high, the mower continues at the same speed, leaving the grass as is.
Implementation:
First we must allow the user to define the prefered speed and then, optionally, when the m…
-
### The problem
I used the Husqvarna HACS integration before and switched to the core implementation now.
I can see all sensors and diagnose data, but I can’t start and stop the mower. That make…