-
Line 54 should = true
Humidity not being reported from Acurite to CWOP
-
Update every sender and receiver to distinguish between these two values
-
The code does not seem to be setting up automatic scheduling. Trying to link WU to PWSWeather.com.
Execution status only shows when I run it manual.
-
I just picked up an Acurite 609TX to expand my temperature/humidity measurement capabilities. The other devices I use are Acurite 592TXR. The 609 seems to be part of the unit 11 code and the 592 are…
-
Weewx/Interceptor Driver for Acurite/Atlas give unidentified 'rainin' error. I was not sure what 'rainin' might be related to, then some research and may have figured-out as the following:
1) 'ra…
ZXant updated
4 years ago
-
Matthew
As always, too many hours already trying to make WeeWX on RasperryPi to connect to Acurite Access, at no result (1st try normal installation; 2nd try driver standalone; etc).
Acurite Acc…
ZXant updated
5 years ago
-
Everything is working fine for me and I am loving this skin for weewx as a replacement to the unfortunately EoL'd AcuLink hub and MyAcurite system that my family used. However I was wondering if there…
-
Hopefully someone can help. I have the Lacrosse Weather Station and when I initially set it up, everything worked. I could see the log data and information in file:///var/www/html/weewx/index.html.
…
-
Hi,
Can anyone tell me why the rain total and rain rate aren't being reported? Here's a sample from the log:'
2d 41 67 65 6e 74 3a 20 41 74 6c 61 73 2f 30 34 37 0d 0a 0d 0a
Nov 22 11:58:17 rasp…
-
rainRate = software in weewx.conf being ignored
I'm unable to get weewx to calculate rainRate and report rain data based on rainin and dailyrain in. Is a sensor that provides rainRate required for …