-
Hi Tony, I would like to know, if the original PCB and schematic files, at least of the clock-face, are available, too, regardless if they are from Kicad, Alttium. Orcad or any other software. I have…
-
I have only just signed up to Github so am unfamiliar with their protocols, but...
I noted this project today and I see some admirable work developing this clock. I have been also working on an NTP b…
-
Hi,
I would ask for help. I tried to build a clock, but they don't work. Nixie doesn't show anything. Wifi settings work, oled display shows time. I tried the test code `www.instructables.com/id/Driv…
-
Hello there,
I'm also trying to do a nixie clock with esp32.
Am i wrong or the code is actually missing some parts? (like the actual interface with the tubes?)
maxdd updated
4 years ago
-
Mhhhh, nice, but after installing the sketch it lasts 1 minute to see the first picture.
The ball does not move and the M5 buttun does respond really slow.
I have installed the:
https://github.co…
-
On Samsung S5, Android 6.0.1 nothing is found when searching, because Bluetooth name is corrupted with strange characters.
-
### Prerequisites
- [x] I have written a descriptive issue title
- [x] I have verified that I am using the latest version of esp32-wifi-manager
- [x] I have searched [open](https://github.com/ton…
S3phe updated
3 years ago
-
Really scratching my head with this. Constantly displaying 24 hours even though mode is 12 hours.
- Arduino Uno with DS3231 module.
- Tried using `RTC.setHourMode(CLOCK_H12);` in setup - no luck.
…
-
First of all, thank you for creating this! I'm attempting to use it with an entirely different nixie clock. I'll update this when I know if it works.
I am new to compiling arduino code but I did ma…
-
I purchased the nixie clock for rpi a little over a year and a half ago, and am only now getting around to try and use it.
The user manual says to hold down the mode button to step through the mode…