-
Communication with MCU...
Got answer! AutoDetect firmware...
Can't autodetect firmware, because proper answer not received.
I can't understand this. With latest NodeMCU firmware (nodemcu_float_0.9.6-…
-
I tried a lot of firmware and ways to connect buttons, but they don’t work. I'm using a NodeMcu v3 with a connected ssd1306 display.
-
I tested your code and enc28j60 is successfully linked up, but the code keep restarting itself roughly every second.
```
ets Jan 8 2013,rst cause:4, boot mode:(1,7)
wdt reset
user_main.c:u…
-
~~Ideally we can support both IDF 3 _and_ 4 (i.e. the NodeMCU branches `dev-esp32-idf3-final` and `dev-esp32`).~~
NodeMCU firmware `dev-esp32` is now on IDF ~4~ 5 (as per https://github.com/nodemcu…
-
We can get the list of releases from the repo's [release page](https://github.com/nodemcu/nodemcu-firmware/releases).
- `esp firmware list`
-
-
see
https://github.com/espressif/esptool
https://hackaday.io/project/159471-esp8266-lua-tutorials
https://hackaday.io/project/161063-esp8266-lua-tutorial-part-2
-
Makefile uses nodemcu-uploader (https://github.com/kmpm/nodemcu-uploader) but the tool no longer works.
We need to either replace the tool or work on a fix!
-
i changed the pin definition as per nodemcu but the problem is when i push button 1 the esp8266 reboot.
#define BUTTON1 D5 // (Don't Change for Sonoff 4CH…
-
D:/newespidf/nodemcu-firmware/components/platform/flash_api.c: In function 'flash_detect_size_byte':
D:/newespidf/nodemcu-firmware/components/platform/flash_api.c:50:25: error: 'ESP_PARTITION_TABLE_A…