-
I changed the display and now the Bitmap does not work as it should. The writing in the code is displayed correctly.
the code:
#include
#include
#include
// Initialize the OLED displa…
-
### Target name(s)
ESP32_C3_REV3
### Firmware version
ESP32_C3_REV3-1.9.1.75
### Was working before? On which version?
_No response_
### Device capabilities
_No response_
### Description
I'm …
1kvin updated
2 weeks ago
-
I've ordered all the pieces for building my own cheapino, and while I wait, I've been thinking of what I have extra, and what I find helpful about my current ergodox. One such thing is a visual indica…
-
is this pluge pattern designed for oled use? playing the pattern on LG oled at default factory settings most of the pattern is black and indiscernible.
-
I got a hint about problems when using a T-Beam V1.2 in combination with a SH1106 OLED. So I connected both OLED types (SH1106 and SSD1306) to the I²C bus in parallel and did several compiler runs wit…
-
### The problem
After upgrade to 2024.5.4 the OLED brightness doesn't go lower then aprox. 40%, either switch off doesn't work. Display always lights. Previous working version was someone from past y…
-
Hey guys! Can anyone tell me how I can use the ESP32 WROOM with an OLED I2C 128x64 display to show mining data?
![display-oled](https://github.com/BitMaker-hub/NerdMiner_v2/assets/78964459/6991…
-
Hi,
The display used in this project is expensive and can't even be found in Chinese stores, how to use an 1.3 inch oled display with i2c connection.
-
# Práctica: Desplegar un Mensaje o icono en un Display OLED con C/C++
## Objetivo
Desarrollar un programa en C/C++ que permita mostrar un mensaje en un display OLED, facilitando la comprensión del …
-
Hey, thanks for the upload. I have designed my own board with your schematics. I have checked and re-checked and I know that everything is correctly routed and assembled. I am using the exact same dis…