-
I have tested both an Arduino Nano and ESP32 module with the SSD1306 OLED module while using the Go machine package with the tinygo SSD1306 driver ("tinygo.org/x/drivers/ssd1306"). It seems no matter …
-
Hello friend, i try the basic code with my wemos d1 mini n transistor BC547 but did't work
This is the result
![IMG-20240930-WA0070.jpg](https://github.com/user-attachments/assets/7904dbf3-d3fb-4983-b…
-
im trying to use an 0.96inch oled 128x64 i2c display but i get the error
`unsupported` display type sh1106_i2c
`
i used the instructions from [this](https://www.reddit.com/r/pwnagotchi/comments/…
-
```fbv - The Framebuffer Viewer
test.bmp
128 x 64
viewer status:
shrink(f) quality shrin(k) (e)nlarge
horizonta(l)_fit ver(t)ical_fit aspect(i)
zoom:1
keys:
r…
-
Hello Colleagues,
@AlexGyver Thank you for sharing this amazing library.
I'm using the 1.6.1 Gyveroled Arduino library version, but I'm facing problems with the Raspberry Pi Pico RP2040.
I'm…
-
What about including support for a small display like SSD1306. This would be usefull for elderly people/ or people not wanting to use app/browser, but still getting insight in to their power usage. Th…
-
Is there any intention to add the ssd309? The later 128x64 OLED'S come with the newer SSD1309. Apparently it has a few addition registers and a couple of changed values for functions.
Other than …
-
OLED2864 is a module based on SSD1306 with I2C interface. Display initialization requires a Reset PIN to be wired and toggled, otherwise it won't react to I2C communication. Once this step is done it …
-
when ext_pwr comes back online the oled is not re-initialized and stays blank. this is particularly noticeable when coming out of sleep
the below was provided by @Nicell as a hack to work around th…
-
### The problem
After upgrade to 2024.5.4 the OLED brightness doesn't go lower then aprox. 40%, either switch off doesn't work. Display always lights. Previous working version was someone from past y…